Tech

How do you put AfterShokz into pairing mode?

Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue. Open your device’s Bluetooth menu and select your headphones.” Audrey will say “connected” and the LED indicator will flash blue one time.

Why are my AfterShokz not pairing?

Your headphones just need to be reset. 1) Start with your headphones powered off and cleared from your devices’ Bluetooth settings. 2) Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your headset will turn on (continue holding the button) and then the LED light will flash red and blue.

How do I put AfterShokz Aeropex in pairing mode?

Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Audrey will say “Welcome to AfterShokz.” Continue holding volume+ until the LED light flashes red and blue. Open your device’s Bluetooth settings and select “Aeropex.” Audrey will say “Connected.” Your headphones should now be connected to your device.

How do I reset my AfterShokz Bluetooth?

Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You’ll hear beeps and/or feel vibrations. Turn your headphones off. Your headphones are now reset and can be re-paired to your device.

Can I connect AfterShokz to 2 devices?

Shokz headphones are equipped with multipoint pairing capabilities, which allows users to connect to two devices at the same time. While you won’t receive audio from both devices at the same time, you’ll be able to transition from one device to the other.

Where is the multifunction button on AfterShokz?

All AfterShokz wireless Bluetooth headphones include a multi-function button. It’s located on the outside of your headphone’s left transducer. The multi-function button is essentially your personal assistant built into your headphones.

How do I reset my AfterShokz Aeropex?

Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations. 4. Turn your Aeropex off. Aeropex is now reset and can be re-paired with new devices.

How do I connect my AfterShokz to my android?

Start with your headphones turned off. Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Open your device’s Bluetooth settings and select the name of your AfterShokz from the list of available devices. Audrey will say “Connected.”.

Is there an app for AfterShokz?

There’s no app so you can’t customize controls, listening profiles, or eventually update the Aeropex’s firmware. Design and build quality are near perfect. I had the AfterShokz Bluez previously, which were larger, heavier, more brute, and had a lot of shiny plastic.

Is AfterShokz compatible with Iphone?

Yes, I have two Aftershokz headphones, including the OpenComm headset, and they both pair easily with my Apple iphone and mini ipad. Sorry, there was a problem. Please try again later.

How do I switch between devices in AfterShokz?

Start with your headphones turned off. Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue. Press and hold the multifunction button and volume+ button for 2-3 seconds. Pair first device. Turn your headphones off.

Why do AfterShokz headphones beep?

The beeping noise will only happen if you mute the headset by pressing the mute button on the headset itself! This means you can bypass these sounds by hitting the mute button in Zoom, Teams, RingCentral, or whatever softphone program you are using, you will just have to be at the computer to unmute it later.

How do you reset Trekz AfterShokz?

Start with your headphones turned off. Enter pairing mode by pressing and holding the power/volume+ button for 5-7 seconds. Press and hold the multifunction button, power/volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds. Turn your headphones off.

Why won’t my AfterShokz headphones turn on?

My headphones won’t turn on. Confirm that you are pressing and holding the volume+ button, which acts as the power button on Trekz Titanium, for 3-5 seconds. Audrey will say “Welcome to Trekz Titanium.” If you continue to be unable to power on your headphones, please contact our Customer Happiness Team.

How do I turn off AfterShokz?

How do I turn off the headphones? Press and hold the volume+ button for 3-5 seconds. You’ll hear a descending tone, signifying the headphones are off.