Tech

Why isn’t my JBL speaker connecting to my phone?

Usually, if it doesn’t connect, this could mean that the sending device (your smartphone or music device) is out of range, or there is another paired device blocking the connection, it doesn’t have enough charge, your device’s Bluetooth is off, or it could be that the devices are not paired.

Why is my JBL Charge speaker not connecting to Bluetooth?

The Speaker Is Not in Bluetooth Pairing Mode If the device does not show up under your Bluetooth menu, the speaker may not be in pairing mode. Press the Bluetooth button on the top of the device next to the power button and ensure it is blinking. Then check your Bluetooth menu again for the device and select it.

Why won’t my phone find my Bluetooth speaker?

If your Bluetooth devices won’t connect, it’s likely because the devices are out of range, or aren’t in pairing mode. If you’re having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet “forget” the connection.

How do I reset my Bluetooth speaker?

With most Bluetooth speakers, you should only have to do so for a few seconds. For just about every Bluetooth speaker out there, pressing and holding the power button and Bluetooth button simultaneously will force the speaker to reset.

Why has my JBL speaker stopped working?

If the speaker works when it is plugged in, but does not work when it is not plugged in, the speaker may have a faulty battery. To replace the battery, please refer to the Battery Replacement Guide.

Why won’t my JBL Flip 4 connect to my phone?

Cause 1: Speaker Is Connected To Another Device The JBL Flip 4 can only connect to one device at a time. To fix this, try to find this intercepting device and disconnect the speaker from that device. If you cannot find the intercepting device, try to isolate the speaker and your preferred device.

How do I connect my JBL?

On iOS, open Settings and tap “Bluetooth.” Make sure Bluetooth is enabled then select the JBL speaker from the list of available devices, under “Other devices.” On Android, open Settings then tap “Connected devices.” Tap “Pair new device” then select the JBL speaker from the list of available devices.

Why won’t my iPhone find my Bluetooth device?

Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other. Turn your Bluetooth accessory off and back on again. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.

How do I connect my JBL Flip 4 to my Iphone?

From the main screen of your device, look for and open Settings. After that go to Bluetooth. Make sure that the Bluetooth feature is enabled by flipping the On / Off switch to the green position then wait for the Bluetooth device to show up in the list.

How do you reset a JBL Flip 4?

Power on your device. Press and hold the play and the volume + buttons at the same time. Maintain this position for about 5 secs. The device will power off as it restores to the factory default. Power on your Flip 4 again, and it will have restored to the factory default.

How do I make my JBL Charge 4 discoverable?

To put it in pairing mode, hold down the Bluetooth button for at least 3 seconds until the light flashes blue. You are now in pairing mode. Locate the Charge 4 on your device, select and you should connect successfully within a few seconds in which you will hear the audible chime.

Why won’t my JBL charge 3 connect to my phone?

Bluetooth Is Not Connected Once your device and speaker are paired make sure the volume is turned up on both. If this fails, restart the speaker and try again. Speaker reset code: Turn on device and press and hold “volume up” and “play pause” simultaneously until power button glows.

How do I connect my iPhone to speakers?

Open Settings. Select “Bluetooth.”. Make sure your iPhone’s Bluetooth is on. Make your speaker available to pair. Find your speaker under “Other Devices” on iPhone, and tap it to connect.

Why is my Bluetooth speaker flashing blue?

A constant blinking blue light can indicate a healthy connection. A slow pulsing blue light can mean the headphones are in pairing mode. The most common light pattern for pairing mode is blinking red and blue.

How do I add a Bluetooth speaker?

Put your Bluetooth device in pairing mode by pressing and holding the Power button or Pairing button. iPhone: Go to Settings > Bluetooth > Other devices. Tap the device to connect. Android: Go to Settings > Connected devices > Bluetooth. Select Pair new device and then tap the speaker’s name.

How long do JBL speakers last?

JBL, one of the most popular manufacturers of Bluetooth speakers, often equip their devices with the capacity to run for 20 hours constantly when fully charged.

How do I control my JBL speaker with my phone?

For Android Head to Settings, as usual, turn on bluetooth, and then choose ‘Pair new device. ‘ On a list of devices, tap on your JBL speakers to start pairing.

Do all JBL speakers connect?

Only those speakers compatible with the specific connection function will connect to each other. For example, you can connect a JBL Flip 4 to a JBL Boombox because they both have JBL Connect+ function. But it is impossible to connect JBL Charge 4 to JBL Pulse 4 because the latter uses PartyBoost instead.

How do I clear my Bluetooth cache?

Open Settings, and then tap Apps. Tap the Sort icon (the down arrow with three vertical bars), then tap Show system apps. Tap OK and all the system apps will appear in the list. Tap Bluetooth > Storage > Clear data. Tap OK to confirm.

How do you update Bluetooth on iPhone?

If you’re having Bluetooth issues, the first place to head is Settings > General > Software Update. You’ll either be prompted to update or see that your iPhone is using the most recent iOS software available.